Shutters Direct - American Plantation Shutters Online Advice

When it is about ordering shutters, you have to be very careful while taking the correct measurements for your shutters. If you do not give the right dimensions for the shutters, you will not be able to get that complete finish that you want to achieve for your windows. This is particularly more important if you are opting for customized shutters. In their case, it is important for you to understand that companies make shutters on the basis of the dimensions you provide them. If you have not done this properly, you cannot blame the company for the flawed finish. If you send the shutters back to incorporate the necessary changes, you will only end up spending more money than actually required. In short, if you do not know how to take the right measurements for the shutters, it can prove to be a very costly affair for you.

When it comes to taking measurements, you should understand that the process varies depending upon the type of the shutters because they are positioned and installed differently. For example, if you want to take the measurements for the interior shutters, you will have to keep in mind that these shutters are mounted from inside. This means they open inside the window or the wall. In order to do so, these shutters are buried within the window or the wall. Therefore, make sure that while you are taking the measurements, you also consider the depth of clearance of the window. For those who do not know about the depth of clearance, let me tell them that this is the minimum depth of the window open that the shutters require to operate conveniently without any interference.

You have to be very careful while taking the measurements of the height and width, top and bottom, and the middle. In fact, in order to avoid the fraction of error, you are strongly recommended to take more than two measurements, horizontally as well as vertically. You also need to take great care in choosing the measurement unit. The recommended units are feet or meter. These are the units that everybody understands easily.

You must also be aware of some basic things. For example, if the window is completely square in shape, the measurement for the diagonals must be equal. Moreover, in order to find if there is any tilt in the window, you will have to take the frame measurement. This way, you will also be able to find out the exact angle calculation. In comparison to the exterior shutters, the interior shutters are easier to measure because the exterior ones require additional hang strips as well as frame strips.

You also have to be very careful while choosing the right type of measurement tape. The fabric tapes will often provide you with misleading results. That is the reason why you are always recommended to use steel tape in order to ensure the most accurate measurement.